Hanna Instruments HI991301 Portable Waterproof pH/EC/TDS Meter (High Range)
The HI991301 is a single probe that can measure temperature, conductivity (EC), pH, and total dissolved solids (TDS). Just two buttons are used to complete every operation, from setup to calibration. The meter has an IP 67 rating and is waterproof.
The HI12883 pre-amplified multiparameter probe has a sensor that is simple to clean and a cloth junction that can be replaced to extend the probe’s lifespan. The HI12883 includes a solid-state amplifier to protect against interference from transient electrical noise.
For increased consistency and reproducibility, user-selectable features include a variety of TDS factors from 0.45 to 1.00 and a range of temperature coefficients () from 0.0 to 2.4%. Additionally configurable are standardized buffer recognition values.
The bottom probe connection makes sure the electrode cord doesn’t get in the way, and these instruments sit comfortably in the palm of your hand. The primary reading, temperature, and calibration instructions are all displayed simultaneously on the big, multi-level LCD.
Description
| SKU | HI991301 |
|---|---|
| Product Name | Portable Waterproof pH/EC/TDS Meter (High Range) – HI991301 |
| Quote Required | Yes |
| pH Range | -2.00 to 16.00 pH; -2.0 to 16.0 pH |
| pH Resolution | 0.01 pH; 0.1 pH |
| pH Accuracy | ±0.02 pH; ±0.1 pH |
| pH Calibration | automatic, at one or two points with two sets of standard buffers (pH 4.01 / 7.01 / 10.01 or pH 4.01 / 6.86 / 9.18) |
| pH Temperature Compensation | automatic 0 to 50 °C; 32 to 122 °F |
| pH CAL Check (electrode diagnostics) | probe condition indicator |
| pH Sensor Check | yes |
| mV Range | ±825 mV (pH‐mV) |
| mV Resolution | 1 mV (pH‐mV) |
| mV Accuracy | ±1 mV (pH‐mV) |
| EC Range | 0.00 to 20.00 mS/cm |
| EC Resolution | 0.01 mS/cm |
| EC Accuracy | ±2% F.S. |
| EC Calibration | automatic, one-point at 12.88 mS/cm |
| TDS Range | 0.00 to 10.00 ppt (g/L) |
| TDS Resolution | 0.01 ppt (g/L) |
| TDS Accuracy | ±2% F.S. |
| TDS Calibration | automatic |
| EC/TDS Temperature Compensation | automatic |
| Temperature Correction Coefficient | β selectable from 0.0 to 2.4 %/ °C with 0.1 increments |
| EC to TDS Conversion Factor | selectable from 0.45 to 1.00 with 0.01 increments |
| Temperature Range | ‐5.0 to 105.0 °C; 23.0 to 221.0 °F |
| Temperature Resolution | 0.1°C; 0.1°F |
| Temperature Accuracy | ±0.5°C; ±1°F |
| pH/EC Probe | HI12883 PVC body, pre-amplified multiparameter probe with internal temperature sensor, quick connect DIN connector and 1m cable |
| Automatic Shut-Off | user selectable |
| Battery Type/Life | 1.5V (3) AAA / approximately 600 hours of continuous use |
| IP Protection | IP67 |
| Environment | 0 to 50°C (32 to 122°F); RH max 100% |
| Dimensions | 154 x 63 x 30 mm (6.1 x 2.5 x 1.2”) |
| Weight | 196 g (6.91 oz.) |
| Ordering Information | HI991301 is supplied complete with HI12883 pH/EC/temperature probe, pH 4.01 calibration buffer sachet (1), pH 7.01 calibration buffer solution sachet (1), HI70030 12.88 mS/cm calibration solution sachet (1), HI70038 6.44 ppt calibration solution sachet (1), HI700601 electrode cleaning solution sachet (2), 100 mL beaker (1), batteries, calibration certificates for both meter and probe, instruction manual, and rugged thermoformed carrying case. |
Related products
Dissolved Oxygen (DO)
Hanna Instruments HI98199 Multiparameter Portable pH/EC/DO Waterproof Meter
Oxidation-Reduction Potential (ORP)
Hanna Instruments HI991003 Waterproof Portable pH/pH-mV/ORP/Temperature Meter with Sensor Check™
Dissolved Oxygen (DO)
Portable Meter
Dissolved Oxygen (DO)