Hanna Instruments HI93510N Waterproof Thermistor Thermometer with Calibration Option
The Waterproof Thermistor Thermometer, model number HI93510N, is enclosed in a tough waterproof shell intended for use both in the lab and out in the field. The HI93510N provides a wide range of probes for measurement in gases, air, and liquids as well as surfaces and substances that require penetration for precise readings. It also allows calibration in an ice bath at 0°C. A large temperature range, from -50.0 to 150°C (-58.0 to 302°F), is covered by optional thermistor probes.
- 0°C Calibration
- Backlit Display
- Thermistor Probes
With a selection of thermistor probes, the Waterproof Thermistor Thermometer – HI93510N is a tough thermometer that can be used both indoors and outdoors. The HI93510N includes features such a backlit display, a choice of Fahrenheit or Celsius units, a hold function, low and high reading displays, and Hanna’s Battery Error Prevention System (BEPS), which turns the meter off when the battery power is insufficient for an accurate measurement.
0°C Calibration – A CAL button located on the face of the HI93510N allows the operator to calibrate the meter and probe in an ice bath at 0°C. This assures any error in the meter and probe interchange does not occur.
°C/°F Readout – Measurements can be displayed in either degrees Celsius or Fahrenheit. A simple press of the °C/°F button will switch between the two scales.
Backlit Display – The HI93510N features a user-activated backlit display that ensures readings are easy to view both indoors in dim lighting and outdoors in sunny conditions.
Interchangeable Thermistor Probes – A wide range of thermistor type probes are available to meet the specific needs of users. Hanna Instruments offers the HI762 series that includes probes to measure the temperatures of surfaces, gases, air, liquid, and semisolid samples.
High/Low Function – The maximum and minimum temperature values are continuously displayed along with current reading on the LCD display. To reset the high/low readings the “CLEAR” button is used.
HOLD Function – The HOLD button on the face of the meter freezes the display to allow the user time to record readings. Although the display is frozen, the meter continues to internally monitor the temperature and update the high and low measurement values.
Optional Calibration Test Keys – For measurements that are always reliable, thermometers must be calibrated periodically. Hanna offers calibration test keys (not included) to offer a fast and simple way of checking the accuracy of the HI93510N. By simply connecting the key to the probe input, the thermistor thermometer will display a reading; if the reading differs more than 0.4°C (0.8°F) from the key value, the thermometer should be recalibrated.
Automatic Shut-off – The HI93510N has a selectable automatic shut-off feature. The meter can be set to turn off after 8 minutes, 60 minutes, or disabled.
Battery Error Prevention System (BEPS) – The Battery Error Prevention System will shut the meter off when the battery power is too low for an accurate measurement.
Low Battery Indicator – When the battery level is below 10%, a warning symbol will blink to indicate low battery condition.
|Waterproof Thermistor Thermometer with Calibration Option – HI93510N
|Thermistor Temperature Range
|-50.0 to 150.0°C; -58.0 to 302.0°F
|Thermistor Temperature Resolution
|0.1°C; 0.1°F (-58.0 to 230.0°F) and 0.2°F (outside)
|Thermistor Temperature Accuracy
|±0.4°C; ±0.8°F (for 1 year, excluding probe error)
|HI762BL air/liquid, stainless steel thermistor temperature probe with black handle and 1 m (3.3’) cable (included)
|8 min (default), 60 min or OFF
|Backlit LCD, CAL Button
|1.5V AA (3) / approximately 2000 hours of continuous use (with backlight off)
|-10 to 50°C (14 to 122°F); RH max 100%
|150 x 80 x 36 mm (5.9 x 3.1 x 1.4’’)
|235 g (8.3 oz)
|HI93510N is supplied with HI762BL temperature probe, batteries, and instruction manual.