OBJECTIVE

To enlighten participants with the knowledge and understanding of the basic requirements of conducting in-house calibration and maintenance of Metrology (Measuring), Testing & Analytical Instruments.

Do you know what is Calibration?

Calibration is the comparison of measurement values delivered by a device under test with those of a calibration standard of known accuracy.

Such a standard could be another measurement device of known accuracy, a device generating the quantity to be measured such as a voltage, a sound tone, or a physical artifact such as a meter ruler.

Obsnap Training Benefits

Gain understanding on the importance of measurement and calibration system
Gain understanding on factors that contribute to measurement uncertainty
Enhance knowledge on related calibration procedures and standards
Improve skills that can applied in workplace
Learn how to successfully manage an effective calibration system

Why Us?

A team of trainer with 25 years experience in various disciplines
Training focus on the principles and practical aspects of measurement and quality measurement system
Provide Hands-on practice
Training can be tailored to your location & your specific requirement
Trainer appointed as Approved Technical Signatories by Department of Standards Malaysia (DSM)

For further details, you can contact:

Cheng Kam Seng : [email protected] (018 – 9129979)

Available in Selangor, Malacca, Johor & Seremban.

Course Trainer

CHENG KAM SENG

(CHIEF TECHNICAL OFFICER)

PROFILE

An Engineer by profession who graduated from Open University Malaysia, he holds a degree majoring in Technology Management.

For almost 15 years, he has been involved in:

Setting up calibration scopes which covers the following category: Heat & Temperature, Mass, Force, Torque, Hardness, Pressure, Dimensional, Time & Frequency for laboratory and on-site,
R&D to develop new calibration scope
Extend & expand range of accreditation for laboratory; established quality system
Developed new scope of calibration in extending & expanding the range of accreditation for laboratory quality system.

He is the Chief Technical Officer for Obsnap Calibration to develop Metrology & Calibration system of ISO/IEC 17025 accreditation in Malaysia & South East Asia.

ACADEMIC

Bachelor of Technology Management – Open University Malaysia
Diploma in Mechanical – Politeknik Shah Alam

EXPERIENCES

Technical Manager – Obsnap Calibration Sdn Bhd Sep 2017 to Present
Technical Manager – Global Venture Metrology Sdn Bhd (Formerly knows as H & P Global Venture Sdn Bhd) 2012 to Aug 2017
Technical Manager – Pyrometro Services (M) Sdn. Bhd 2009 to 2012
Assistance Quality Manager – Power Metal Technology Sdn Bhd 2008 to 2009
Assistance Lab Head – Sendi Mahir Sdn Bhd 2004 to 2008

ACHIEVEMENTS

15 years of experience in Metrology & Calibration Systems. (Calibration Laboratoratories)
10 years as approval signatory authorised by the accredited inspection body (Standards Malaysia) to approve calibration certificates.
Approval signatories cover in category Heat & Temperature, Mass, Force, Torque, Hardness, Pressure, Dimensional, Time & Frequency
Consults and develops Metrology & Calibration system of ISO/IEC 17025, ISO9001
Successfully apply accreditation in ISO/IEC 17025 calibration for three companies (the latest company is Obsnap Calibration Sdn Bhd)

TRAINING ACTIVITY

Attend Bengkel MS ISO/IEC 17025 – General Requirements For The Competence of Testing and Calibration Laboratories –
Standard Malaysia
Attend Course on Internal Auditor – Lab Consult PLT
Attend Course on Measurement Uncertainty – Lab Consult PLT
Attend World Class Leadership Skills training – Personal Development Leadership Management
Attend Workshop on Measurement Uncertainty Evaluation – SIRIM Training Services Sdn Bhd
Attend Course on QC Problem Solving Approach Training – The Association For Overseas Technical Scholarship. ( AOTS )
Attend Course on Calibration of Deadweight Pressure Balance by Cross-Floating Method
In house training for technical staff – Sendi Mahir Sdn Bhd & Pyrometro Services (M) Sdn Bhd
Attend Course on ISO 17025 Internal Auditing Training – Global Venture Metrology Sdn Bhd
. In house training ISO 9001: 2000 Introduction Training – Power Metal Technology Sdn Bhd
Attend Course On The Effective Supervisory Program – Trainex Consultancy (ASIA) Sdn Bhd

CONTACT DETAILS

Get to know his main company – Obsnap Calibration Sdn. Bhd.

He can be contacted at [email protected]

Course Facilitator #1

NG SHONE FONE

(CEO – HRDF Trainer – Coach)

PROFILE

The founder of Obsnap Sales & Service (1997), which progressively led to the Obsnap Group of Companies known today. A street smart entrepreneur who has done in-house sales training program and on-site presentations for industrial experience sharing and the selling of testing & measuring equipment and other material testing machinery for the QC/QA sector.

Over the years, he has founded and co-founded 8 companies with businesses ranging from trading and manufacturing to services, and that include Imports and exports, in Malaysia and oversea

ACADEMIC & PROFESSIONAL QUALIFICATIONS

Train the Trainer – HRDF (2019)
Radiation Proctection Officer – Industry Level 2 -Atomic Energy Licensing Board (2017)
MBA in Management – Golden State University (2011)
Adv. Diploma in Computer Studies – NCC Education Services Limited (1998)
Certificate in Technology (Electronic Engineering) – International Coaching Federation of USA (1991)
Diploma of Electronic Engineering – TARC college (1991)

EXPERIENCE

Sales & Application Engineer – AEI Scientific (SCIENTIFIC AND ENGINEERING INSTRUMENTS)
Sales Engineer – C. Melchers Material Testing (TESTING & MEASURING INSTRUMENTS TRADING)
Sales Executive – Allsafe (SAFETY EQUIPMENT & PRODUCTS)
Sales Representative – Silicon Instrumentation (TESTING & MEASURING INSTRUMENTS TRADING FIRM)
Technical Representative – Fuji Xerox
Technical Assistance – Hitachi (MANUFACTURING FACTORY)

ACHIEVEMENT

Serial Entrepreneur for 4 sucessful businesses (Obsnap Instruments Sdn Bhd, JS Analytical Sdn Bhd, Victor Equipments Resources Sdn Bhd & Obsnap Calibrations Sdn Bhd)
Coach & Grow Programme (CGP) Alumnus – Cradle Fund Sdn Bhd & Proficeo Consultants Sdn Bhd (2018)
Leadership Coaching for NonProfit Organisation (NPO) i.e. Rumah Charis Managers for 3 branches

CONTACT DETAILS
Get to know his main company – Obsnap Instruments Sdn. Bhd.

He can be contacted at [email protected]

Course Facilitator #2

SAMSON CHONG TUN SHIN

(Sales Director)

PROFILE

A graduate under Material Engineering with over 10 years of sales experience thanks to his passion for understanding which Material Testing equipment is suitable for the various industrial manufacturing and production sector. Continues to support ObsnapGROUP by managing 2 companies that specialise in Material Testing and Sample Preparation Equipment for local and oversea clients.

ACADEMIC

Bachelor’s Degree of Material Engineering – University Sains Malaysia

EXPERIENCES

Sales Manager – Victor Manufacturing Sdn Bhd 2017-Present
Sales Manager – Victor Equipments Resources 2012-Present
Sales Manager – Victor Equipments Resources 2010-2012
Product Manager – Obsnap Instruments Sdn Bhd 2008-2009
Senior Sales & Application Engineer – Obsnap Instruments Sdn Bhd 2006-2007
Sales & Application Engineer – Obsnap Instruments Sdn Bhd – 2006

ACHIEVEMENT

13 years of sales & technical experience in test & measuring equipments, specialized in Material Testing equipment & Metallurgy Sample Preparation
Co-founder of Victor Brand which is focusing on Universal Testing Machine
Achievement in promoting and selling Victor brand tensile machine to S.E.A & Europe market
Started manufacturing of Victor tensile machine in 2017

CONTACT DETAILS
Get to know his main company – Victor Equipments Resources Sdn Bhd.

& Victor Manufacturing Sdn Bhd

He can be contacted at [email protected]

Course Facilitator #3

JOE YEN THEN PAU

(Sales Director)

PROFILE

One of the Director for JS Analytical which progressively led JS Analytical sales to grow every year. He able to conduct on-site presentations about product sharing and industrial experience sharing and the selling of testing & measuring equipment for the QC/QA sector and production machine for production sector.

ACADEMIC

Bachelor in Computer Science (2001)
Radiation Proctection Officer – Industry Level 1 -Atomic Energy Licensing Board (2011)

EXPERIENCES

Sales & Application Engineer – Obsnap Instruments (TESTING & MEASURING INSTRUMENTS TRADING) – 6 years
Insurance Agent – Great Eastern – 4 years
IT Support – EDS – 3 years

CONTACT DETAILS
Get to know his main company – JS Analytical Sdn Bhd.

He can be contacted at [email protected]

Course Facilitator #4

NORHASLINDA AHMAD

(Quality Engineer/Approved Signatory)

PROFILE

A graduate under industrial Electronic Engineering with over 10 years of calibration experience in accredited and non accredited laboratory. Also, an approved signatory for dimensional scope and involved in develop new scope of capability. Hands-on experience in calibration of various Dimensional, Temperature, Pressure and Mass measuring instruments.

ACADEMIC

MEng Industrial Electronics & Control, University Malaya
BEng. (Hons) in Industrial Electronic, University Malaysia Perlis

EXPERIENCE

Quality Engineer – Obsnap Calibration Sdn Bhd March 2020 to Present
Calibration Specialist – Continental Tyre PJ (M) Sdn Bhd 2015 to 2019
Calibration Engineer – Teknicast Sdn. Bhd. 2013 to 2014
Section Head (Dimension Laboratory) – Pyrometro Services (M) Sdn Bhd 2010 – 2013

TRAINING ACTIVITY

In house training on Understanding of MS ISO/IEC17025:2005 – Pyrometro Services (M) Sdn. Bhhd.
Training Calibration of Caliper, Micrometer and Dial Gauge – NML Sirim
Uncertainty of Measurement – Sendi Mahir Sdn Bhd
Competency of Pressure Calibration Workshop – Pyrometro Academy Sdn Bhd
Competency of Temperature Sensor Workshop – Pyrometro Academy Sdn Bhd
Competency of Temperature Measuring Device by Simulation – Pyrometro Academy Sdn Bhd
Timer Calibration – DHG Metrology Sdn. Bhd.
Angle Protractor Calibration – DHG Metrology Sdn. Bhd.
IATF 16949:2016 Internal Quality Audit Training – TPA Consultancy Sdn. Bhd.
Rubber Analyzer (MV2000, MDR200 & RPA2000) Customer Maintenance Training Course

CONTACT DETAILS

She can be contacted at [email protected]

Course Facilitator #5

Upload Image...

ON ENG HENG

(Metrology & Testing Specialist Engineer)

PROFILE

An engineer who has over 3 years of experience in Research & Development field by using CAD software & various testing equipment and machines. He has also 2 years of experience in production & quality control department by leading a team of quality control in a manufacturing/production environment. He is also very well verse in a lot of complex metrology machines like Coordinate Measuring Machine & Video Measuring System.

ACADEMIC

Bachelor of Mechanical Engineering with Honors (2016)

EXPERIENCE

Metrology & Testing Specialist Engineer 2020-Present
Production & Manufacturing Engineer 2019-2020
Research & Development Engineer 2016-2019
Membership Consultant 2012-2015

ACHIEVEMENT

Leading a QC team to control the quality of Sony’s back chassis for LCD TV
Successfully design 5 models of LCD TVs from scratch
Best Rookie Award for Sales Biggest Improvement Award for Sales
Selected as emcees 4 times in university level events.

CONTACT DETAILS

He can be contacted at [email protected]

UPCOMING EVENTS

Over more than 20 years, OBSNAP GROUP has served the local and oversea scientific & technical sector, since 1997. This includes our wide variety of Metrology, Material Testing, Analysis & Detection Instruments and Equipment. We are ISO/IEC 17025 Accredited Calibration Laboratory and provide HRDF claimable training for those interested to do their own in-house calibration.

Norhaslinda Ahmad : [email protected] (017-502 6450)

Available in Selangor, Malacca, Johor & Seremban

PAST EVENTS

2018

Proper Calibration to Ensure Equipment Accuracy

How to do Proper Calibration to Ensure Equipment Accuracy That You Can Trust! (Seminar #1 & #2 – 16 & 17 July 2018)

KEY TOPICS:

Keep Process Safe
Reduce Costs from Manufacturing Errors
Maintain ISO 9001/9002 & IEC/ISO 17025 Certification
Have HANDS-ON Experience with Pressure Calibrator and Dry Block Temperature Calibrator.

VIEW GALLERY

Course Type

Course A : Competency of Calibration to Ensure Equipment Accuracy

Course B : Understanding Metrology Term in Calibration System

Course C : Understanding of Measurement Uncertainty

Course A : Competency of Calibration to Ensure Equipment Accuracy

OBJECTIVE:

Provide a clear understanding on the basic requirements of conducting in-house calibration and how to maintain & handle mechanical instruments.

SCHEDULE

Session 1 – Introduction ( 9.00 AM – 10.00 AM )

a) What is Calibration?

b) Standard Management System for Measurement

c) Enviroment & Temperature Control

d) Lab Responsibility

e) Calibration Tracebility System

f) Proper regular calibration on measuring instruments

Session 2 – Hands-on ( 10.15 AM – 5.00 PM )

Hands-on experience with calibration & handling for Vernier Calliper, Micrometre and Height Gauge.

Vernier Calliper

Micrometre

Height Gauge

Session 3 – Q & A ( 5.00 PM – 5.30 PM )

Google Map

Course B : Understanding Metrology Term in Calibration System

OBJECTIVE:

Participants will be guided with the knowledge on how to prepare and complete the procedure for the calibration system requirements for ISO 9001 and ISO 10012. (Example will be provide throughout the course to help illustrate subject matter)

SCHEDULE

Session 1 – Introduction ( 9.00 AM – 12.00 PM )

What is a (calibration certified) accredited laboratory?

a) ISO 9001 calibration requirement?

b) What is measurement uncertainly? Error? Correction? Permissible Error?

c) What is measurement capability & quality?

d) What is Calibration & Traceability?

Session 2 – Calibration details ( 1.30 PM – 4.30 PM )

a) Writing for Internal Calibration work instruction.

b) How often to calibrate equipment?

c) Instrument Calibration status label

d) How to handle IMT equipment during out of

e) Environment control for calibration

f) Safeguarding IMT equipment

g) What is a calibration certificate?

Session 3 – Calibration cert ( 4.30 PM – 5.00 PM )

Variation of Calibration Certificates issued.
Calibration certificate verification (Workshop)

Google Map

Course C : Understanding of Measurement Uncertainty

Understanding of Measurement Uncertainty (Theory #1 – 11 Nov 2018)

OBJECTIVE:

Understand the emphasis of applying the calibration concepts that are suitable for local industries; accordingly to currently accepted International documents. Technical terms are defined and simplified to remove unnecessary mathematical complexity.

SCHEDULE

Session 1 – Introduction ( 9.00 AM – 12.30 PM )

Measurement uncertainty 101

ISO reference standard guide to equipment uncertainty in measurement

ISO/IEC 17025 requirements

Simple mathematical concepts on measuring and evaluating uncertainty

Understanding Partial Differentiation and student t’s statistic-distribution

Basic statistical concepts in metrology

Evaluation steps for the uncertainly

Origin of uncertainty

Measurement uncertainty model
Identify the Standard deviation and uncertainty
Identify the combined standard uncertainty
Identify the effective degrees of freedom
Identify the expanded uncertainly

Session 2 – Measurements ( 1.30 PM – 4.45 PM )

The connection between instrument tolerance, specification, error and measurement uncertainty.

Fundamental examples on the calculation of measurement uncertainty

Session 3 – Q & A ( 5.00 PM – 5.30 PM )

Google Map

2019

Introduction to Measurement Uncertainty

Introduction to Measurement Uncertainty (Practical #2 – 9 & 10 April 2019)

OBJECTIVE:

Understand the emphasis of applying the calibration concepts that are suitable for local industries, accordingly to currently accepted International documents. Technical terms are defined and simplified to remove unnecessary mathematical complexity.