Description
Specifications:
Model 010C Wind Speed Sensor Specifications
| Performance Characteristics | |
| Maximum Operating Range | 0-60 meters/sec or 0-125 mph |
| Starting Speed | 0.27 meters/sec or 0.6 mph |
| Calibrated Range | 0-50 meters/sec or 0-100 mph |
| Accuracy | 1% or 0.15 mph |
| Temperature Range | -50C to +85C |
| Response | Distance constant less than 5 ft of flow* |
| The distance traveled by the air after a sharp-edged gust has occurred for the
anemometer rate to reach 63% of the new speed. Distant constant less than 15ft of flow with optional 010C-1 aluminum cupset. |
|
| Electrical Characteristics | |
| Power Requirements | 12 VDC at 10 mA |
| Output Signal | 11-volt pulse |
| Output Impedance | 100 ohms maximum |
| Heater Power Requirement | 12 VDC at 350 mA |
| Standard Cable Length | 300’ maximum (consult factory if longer cable is to be used for special requirements) |
| Physical Characteristics | |
| Weight | 1.1 pounds |
| Finish | Anodized aluminum |
| Mounting | Use with 191 Crossarm |
| Cabling | 1953-XX Cable (XX is cable length in feet) |
Model 020D Wind Direction Sensor Specifications
| Performance | |
| Azimuth | Electrical 0-356, Mechanical 0-360 |
| Threshold | 0.6 mph |
| Linearity | ½% of full scale |
| Accuracy | 3 |
| Damping Ratio | 0.4 |
| Delay Distance | Less than 3 feet |
| Temperature Range | -50C to +85C |
| Electrical Characteristics | |
| Input Power | 9-18 VDC, 10 mA |
| Output* | a. 0-5 volts for 0-360 (default setting)
b. 0-2.5 volts for 0-360 (user selectable) |
| Output Impedance | 100 Ohms maximum |
| Maximum Cable Length | 300 feet |
| Physical Characteristics | |
| Weight | 1.1 pounds |
| Finish | Anodized Aluminum |
| Mounting | Use with Crossarm Model 191 or equivalent |
| Cabling | 1957-XX Cable (XX is cable length in feet) |
