ULTRASONIC FLAW DETECTOR – TUD320

 

Ultrasonic Flaw Detector - TUD320

 

Features:
  • Color TFT display screen with backlight
  • Reference waves with different colors can be displayed at the same time
  • Curved surface correction: inspection of inner and outer curved surface, auto-correcting the detecting result according to
  • diameter of curved surface
  • DGS (AVG) curve: special key is designed for 2 types of DGS curves: flat-bottom hole and infinite plane.
  • Real-time battery power indication, displayed by percentage
  • Displaying echo times during multi-times echo detecting in which users are required to input the thickness value of work pieceinto instrument.
  • Automatic generation of DAC curve, and 30 points can be recorded at most, adjustable offset curves and gain correction functions are available. 
  • Three detecting modes: single-probe , dual-probe and transmission;
  • Two scanning mode: A and B;
  • Two measuring unit: mm/inch;
  • Four Rectify Ways: positive half-wave, negative half-wave, full wave and radio frequency.
  • Gate alarming function.
  • 10 detecting channels are available with a separate detecting parameter and DAC curve in every channel. 

 

Technical Specification
 

Items

Description

Scanning Range

2.5 mm ~5000mm

Scanning Resolution

0.1mm (2.5mm ~100mm)  1mm (100 mm ~5000mm)

Gain Range

0dB ~110 dB

D-Delay

-20µs~+3400µs

P-Delay

0µs~99.99µs?resolution 0.01µs

Sound speed

1000 m/s~9999m/s

Bandwidth

0.2MHz~15MHz ?Low0.2~1 Mid.0.5~4 High 3~15?

Vertical linearity error

≤3%

Horizontal linearity error

≤0.2%

Dynamic range

≥32dB

Rectification

Positive half wave, negative wave, full wave, and RF

Sensitivity leavings

≥60dB

Test mode

Pulse-echo, dual and through transmission

Pulser

Spike excitation pulser

Damping

50ohms, 150ohms and 400ohms

Reject

Linear, 0-80% of full screen, variable in steps of 1%

Unit

Metric/inch

Interface

RS232

Printer

TP UP-NH-S line thermal printer

AC requirements

85-264V AC/1.0A,47-63Hz

Temperature

-10?~40?

Humidity

20%~90%RH

Power supply

Li battery 4×3.6V  4000mAh

Charging time

4~5hours

Weight

1.47kg

Overall dimension

243mm×173 mm×70 mm

 
 
Standard delivery
  • Main unit                                         
  • Neck strap                                         
  • Power adapter               
  • Couplant                                            
  • Straight probe  
  • Angle probe
  • Cable for probe            
  • Instruction manual                       
  • Screwdriver           
  • TIME certificate                                 
  • Warranty card