ULTRASONIC FLAW DETECTOR – TUD300 

Ultrasonic Flaw Detector TUD 300

 

Features:
  • Real-time multi function system, stable, reliable and efficient operation
  • Measuring of pitch interval and analyze of echo times;
  • Auto-calibration of probe and auto-gain.
  • Two measuring unit: mm/inch;
  • All built-in software can be up-graded on PC;
  • Lock/unlock the system parameters;
  • Equipped with gate setting and alarming function.
  • Two measurement displaying mode: A scan and B scan;
  • Freeze/defreeze waveform and detection parameters;
  • Communicating with PC by RS232 port for transferring the measuring data and system parameters;
  • 10 detecting channels are available with separated detecting parameters and DAC curve in every channel.
  • Automatic generation of DAC curve, and 30 points can be recorded at most, adjustable offset curves and gain correction functions are available.
  • Provided with linear reject function, the highest range is 80% of the screen height;
  • Memory up to 300 A scanned images, parameters and DAC, and 30000 thickness values.  
  • Four Rectify Ways: positive half-wave, negative half-wave, full wave and radio frequency.
  • Three detecting modes: single-probe , dual-probe ones and transmission; 

 

Technical Specification

Items

Description

Scanning Range

2.5 mm ~5000 mm

Scanning Resolution

0.1mm (2.5mm ~100mm)     1mm (100 mm ~5000mm)

Gain Range

0dB ~110 dB

D-Delay

-20µs~+3400µs

P-Delay

0µs~99.99µs?resolution 0.01µs

Sound speed

1000 m/s~9999m/s

Bandwidth

0.2MHz~15MHz ?Low0.2~1? Mid.0.5~4? High 3~15?

Vertical linearity error

≤3%

Horizontal linearity error

≤0.2%

Dynamic range

≥32dB

Rectification

Positive half wave, negative wave, full wave, and RF

Sensitivity leavings

≥60dB

Test mode

Pulse-echo, dual and through transmission

Pulser

Spike excitation pulser

Damping

50ohms, 150ohms and 400ohms

Reject

Linear, 0-80% of full screen, variable in steps of 1%

Unit

mm/inch

Interface

RS232

Printer

TP UP-NH-S line thermal printer

AC requirements

85-264V AC/1.0A,47-63Hz

Temperature

-10?~40?

Humidity

20%~90%RH

Power supply

Li battery 4×3.6V  4000mAh

Charging time

4~5hours

Weight

1.47kg

Overall dimension

243mm×173 mm×70 mm

 
 
Standard delivery
  • Main unit                
  • Neck strap                                        
  • Power adapter 
  • Couplant   
  • Straight probe  
  • Angle probe
  • Cable for probe            
  • Instruction manual                       
  • Screwdriver           
  • TIME certificate                                 
  • Warranty card