TES-593 ElectroSmog Meter

TES 593 - ElectroSmog Meter

 

FEATURES
  • Frequency range 10MHz to 8.0GHz
  • 3 axis isotropic measurements of EMF
  • Non-directional (isotropic) measurement with three-channel measurement probe
  • High dynamic range
  • Configurable alarm threshold and memory function
  • Easy & safety to use

 

SPECIFICATIONS

ELECTRICAL SPECIFICATIONS

 

Sensor type

Electric field (E)

Frequency range

10MHz to 8GHz

Directional characteristic

Isotropic, 3-dimensional

Measurement range
(CW signal>50MHz)

20mV/m to 108.0V/m
53mA/m to 286.4mA/m
1μW/m2 to 30.93W/m2
0μW/cm2 to 3.093mW/cm2

Absolute error
(@1V/m and 50MHz)

± 1.0dB

Frequency response
(taking into account typ. CAL factor)

± 1.0dB (50MHz to 1.9 GHz)
± 2.4dB(1.9GHz to 35GHz)

Isotropy deviation

Type. ±1.0dB ? f>50 MHz

Overload limit

0.42mW/cm2 (40 V/m)

Temperature response
(0 to 50
?)

± 0.5dB

 

GENERAL SPECIFICATIONS

 

Measurement method

Digital , triaxial measurement

Directional characteristic

Isotropic, triaxial

Measurement range selection

One continuous range

Display resolution

0.1mV/m, 0.1μA/m, 0.1μW/m2, 0.001μW/cm2

Setting time

Typically 1s ( 0 to 90% of meas. value)

Display refresh rate

Typically 0.5Sec.

Display type

LCD 4 digit

Audible alarm

Buzzer

Measurement units

mV/m , V/m , μA/m , mA/m , μW/m2, mW/m2, μW/cm2

Measurement display value

Instantaneous measured value, maximum value,
average value or maximum average value

Measurement alarm function

Adjustable threshold with ON/OFF

Measurement calibration factor CAL

Adjustable

Manual data memory and read storage

99 sets ( only recall by meter )

Battery

9V

Battery life

>15 hours

Dimensions

Approx. 67(W) x 60(T) x 247(L) mm

Weight

Approx. 260g (including battery)

Accessory

9V battery, carrying case, manual