Testex Press-O-Film Replica Tape-TESTEX TAPE FULL RANGE

TESTEX

 

Replica tape for measuring blasted surface profiles. By placing the Tqc replica tape on the surface and rubbing over it, the Rt (total roughness) or peak-to-valley height of the profilecan be taken and then measured with a film thickness meter.

1. TQC Replica tape consists of a layer of compressible foam affixed to an incompressible polyester substrate. 
2.When pressed against a roughened/gritblasted (steel) surface, the foam collapses acquiring an impression of the surface. 
3.Placing the compressed tape between the anvils of the SP1570 micrometric thickness gage, and subtracting the contribution of the incompressible substrate (50 micrometers or 0.002 inches), gives a measure of the surface profile. 

One box of Testex contains tape for 50 measurements.

LD2070
Type: Testex-tape X-COARSE range: 1.5 to 4.5 mils (40 to 115µm)

LD2071
Type: Testex-tape COARSE range: 0.8 to 2.0 mils (20 to 50µm)