BL 983313

Conductivity Mini Controller @ 1999 µS/cm

BL983313 Conductivity Mini Controller


·         Easy to handle

·         Fire retardant casing

·         Selectable overdose protection system

·         Splash resistant cover

This HANNA mini controller has been specially designed for water conditioning and growing applications. Compact in size, it can be mounted in confined spaces or even right next to the vat or barrel containing the chemicals. This meter permits automatic control of installations previously checked manually.

EC measurements are shown on the display and the multicolored LED continuously indicates if the mini controller is in measurement, dosing or alarm mode. BL 983313 measures in the 0 to 1999 µS/cm range.

Users can choose automatic or manual dosing mode with a switch on the front panel. Manual control is particularly useful during maintenance operations, because it permits operators to enable or disable the dosing relay according to need. The overtime control system advices users when the relay is active for too long, helping to prevent over dosage. 

Order Information:
BL 983313-0 (12 VDC), BL 983313-1 ( 115/230V), are supplied with mounting brackets, transparent cover and instruction manual.




0 to 1999 µS/cm



1 µS/cm



±2% F.S.



HI 7634-00 EC/TDS probe with internal temperature sensor and 2 m (6.6’) cable (not included)

Temperature Compensation


Automatic, 5 to 50°C (41 to 122°F) with ß = 2%/°C



manual, with CAL trimmer

Dosing Relay


maximum 2A (fuse protected), 250 Vac, 30 VDC contact close when measure > set point



adjustable from 0 to 1999 µS/cm



adjustable, typically from 5 to approx. 30 minutes

Power Supply


See Chart



79 x 49 x 95 mm (3.1 x 1.9 x 3.7’’)



See Chart