Sesotec metal detectors and magnet systems prevent damage to size reduction machinery. They are integrated into conveyor belts for inspection of bulk materials and piece goods.

 

C-SCAN DLS
DLS tunnel metal detectors are separable and can be easily installed on either new or existing conveyors. They are particularly suitable for inspecting tall materials as detection accuracy remains consistent across the entire aperture. A typical application is the protection of cutting mills and shredders.

Show more


ELCON
Single-face metal detector that can be installed in small conveyor systems, e.g. with aluminium profile construction, for applications where the height of the product stream will not exceed 100 mm.

Show more


ELS
Single face ELS metal detectors are installed directly underneath the belt of a conveyor where the depth of conveyed material is shallow ie close to the belt. A typical application is the inspection of sprues to protect auger granulators. ELS can also be used to inspect the quality of plastic components to ensure the core is not broken.

Show more


EXTRACTOR-J
Magnetic separator for Jacob pipelines; Inspects granulates of up to 10 mm.

GLS
Enclosed-aperture tunnel metal detector, installed in bonded-type conveyor belt systems for applications requiring higher scanning sensitivity.

GM
Permanently magnetic grid magnets can be supplied in circular, rectangular or square format and are therefore universally applicable. Ferrous particles are filtered out from bulk material as they pass through the magnetic grid.

Show more


GMT
Permanent-magnetic grid magnets of type GMT & GML predominantly are used in the plastics industry for the separation of coarse ferrous contaminants. Ferrous particles are filtered out of the bulk material while the rest of the material passes the magnet grid. It is recommended to regularly check the magnet to make sure that contaminants are not knocked off. The low purchase costs provide excellent benefit that often results in a considerably improved product quality and in a reduction of expensive repairs.

Show more


MAGBOX AUTO CLEAN

The magnetic separation system MAGBOX AUTO-CLEAN is used in process lines for the efficient and automated cleaning of even the finest ferrous contaminations from gravity fed bulk materials.


MAGBOX MXP
MAGBOX inline magnets are mainly installed in existing pipeline systems to remove fine and very fine ferrous metal contaminants from bulk materials.

OM
This robust magnet system is also available with optional hydraulic drive. Guards on both sides prevent operator injury or damage to the discharge conveyor.

P-SCAN RP
Metal detector for installation in pipeline systems, e.g. for free-fall applications, pneumatic conveyor lines, material columns that are slowly moving down, or pump feed lines. The metal detector is used for the inspection of bulk materials, fibres, or liquid/pasty products.

Show more


PLASTICON-S
In plastics-processing plants conveyor belts with integrated metal detectors are used for the protection of comminution machines such as cutting mills, shredders, etc.. The conveyor belt systems of the PLASTICON series have been specifically designed and built for this purpose. The PLASTICON system inspects piece goods or bulk materials (moulded parts, blow-moulded parts, reject parts, sprues, etc.) for metal contaminations. Lateral guides with brush seals prevent small parts from getting under the conveyor belt. When a metal is detected the conveyor belt is stopped or reversed. Metal detectors of model series ELCON can be used for PLASTICON-S.

Show more


PLASTICON-XL
In plastics-processing plants conveyor belts with integrated metal detectors are used for the protection of comminution machines such as cutting mills, shredders, etc.. The conveyor belt systems of the PLASTICON series have been specifically designed and built for this purpose. The PLASTICON system inspects piece goods or bulk materials (moulded parts, blow-moulded parts, reject parts, sprues, etc.) for metal contaminations. Lateral guides with brush seals prevent small parts from getting under the conveyor belt. When a metal is detected the conveyor belt is stopped or reversed. Metal detectors of model series ELS, DLS, or GLS for PLASTICON-XL can be used depending on the required scanning sensitivity and on the height of the material on the belt.

Show more


PM

For the separation of ferrous contaminants, plate magnets are installed in a continuous material flow above conveyor lines, in free fall, under chutes and slides, etc.


PRM
An inline chute magnet system for use with fibrous materials and materials that tend to bridge, which has proven effective with very high throughput rates and tubular pressure conveyor systems. Hinged stainless steel plates swing out for easy cleaning of the magnet blocks.

Show more


RAPID DUAL
Metal separator used to inspect slowly moving bulk material such as foil flakes as well as large streams.

RAPID VARIO-FS
The RAPID VARIO-FS is a metal separator with product effect compensation that is installed at the cyclone outlet for freefall applications. Separate detection and separation units make it readily adaptable to many different configurations and conditions.

Show more


RM
Tubular inline magnetic separators are used in pipeline conveyors to thoroughly separate ferrous metals from bulk materials. The housing as well as the conical top of the magnetic core are made of corrosion-resistant stainless steel (1.4301). There is sufficient clearance between the magnetic core and the housing to ensure free product flow, even when metal contaminants are adhering to the core.

Show more


ROTOBOX
Inline magnet system for inspection of bulk goods that tend to bridge or cake. The rotating action of the magnetic rod matrix, driven by an electromotor, prevents blockages of the separator and ensures that the product remains in close contact with the magnets.

Show more


ROTOBOX AUTO-CLEAN
This inline rod magnet system is used for freefall applications involving bulk goods that tend to bridge or cake. The rotating action of the magnetic rod matrix, driven by an electromotor, prevents blockages of the separator. Cleaning of the magnets is fully automatic, as the magnetic cores are pneumatically transported inside the stainless steel tubes to the cleaning zone.

Show more


SM
Permanent magnetic filter bars can be installed anywhere in the bulk material stream. The extremely high magnetic forces separate even weakly magnetized stainless steel particles from the product stream.

Show more


TM
Drum magnet system in which the position of the magnetic field can be adjusted to ensure optimal separation of contaminants and clean material.

TMG
Drum magnet system in which the connector dimensions are customized to allow for easy integration into the customer’s existing systems.

WM

Permanent magnetic head rollers are designed to replace the drive roller at the discharge end of belt conveyors. This primary system removes coarse and medium-sized ferrous contaminants.