Metal impurities can plug up hot nozzles, resulting in under-filling of molds. Metal detectors and separators prevent this defect and ensure perfect products.

RAPID 4000-FS
Metal separator for freefall applications that is installed at the discharge of the cyclone or bag filling tube, for applications requiring higher scanning sensitivity.

RAPID VARIO-FS
The RAPID VARIO-FS is a metal separator with product effect compensation that is installed at the cyclone outlet for freefall applications. Separate detection and separation units make it readily adaptable to many different configurations and conditions.

Show more


P-SCAN RP
Metal detector for installation in pipeline systems, e.g. for free-fall applications, pneumatic conveyor lines, material columns that are slowly moving down, or pump feed lines. The metal detector is used for the inspection of bulk materials, fibres, or liquid/pasty products.

Show more


GLS
Rectangular-aperture GLS tunnel metal detectors are well suited to high-precision applications. The enclosed-aperture design ensures very high metal sensitivity throughout the tunnel area.

MAGBOX MXP
MAGBOX inline magnets are mainly installed in existing pipeline systems to remove fine and very fine ferrous metal contaminants from bulk materials.

MAGBOX AUTO CLEAN

The magnetic separation system MAGBOX AUTO-CLEAN is used in process lines for the efficient and automated cleaning of even the finest ferrous contaminations from gravity fed bulk materials.


PRESEP
The metal separation unit PRESEP is designed for highly contaminated material; neodymium magnets first separate all metallic contaminants before the metal separator removes all non magnetic contamination.

Show more


EXTRACTOR-J
Magnetic separator for Jacob pipelines; Inspects granulates of up to 10 mm.

GM
Permanently magnetic grid magnets can be supplied in circular, rectangular or square format and are therefore universally applicable. Ferrous particles are filtered out from bulk material as they pass through the magnetic grid.

Show more


GMT
Permanent-magnetic grid magnets of type GMT & GML predominantly are used in the plastics industry for the separation of coarse ferrous contaminants. Ferrous particles are filtered out of the bulk material while the rest of the material passes the magnet grid. It is recommended to regularly check the magnet to make sure that contaminants are not knocked off. The low purchase costs provide excellent benefit that often results in a considerably improved product quality and in a reduction of expensive repairs.

Show more


PNEUMAG
This high intensity magnetic separator is mainly designed to be installed into pneumatic conveying lines with air flow up to 25m/s. The PNEUMAG system will be of great interest to the food and pharmaceutical industries with products like flour, sugar, starch, pharmaceutical drugs and other powders and granulates.The special housing design allows the product to pass through the unit in both directions.

Show more


PRM
An inline chute magnet system for use with fibrous materials and materials that tend to bridge, which has proven effective with very high throughput rates and tubular pressure conveyor systems. Hinged stainless steel plates swing out for easy cleaning of the magnet blocks.

Show more


RM
Tubular inline magnetic separators are used in pipeline conveyors to thoroughly separate ferrous metals from bulk materials. The housing as well as the conical top of the magnetic core are made of corrosion-resistant stainless steel (1.4301). There is sufficient clearance between the magnetic core and the housing to ensure free product flow, even when metal contaminants are adhering to the core.

Show more


ROTOBOX
Inline magnet system for inspection of bulk goods that tend to bridge or cake. The rotating action of the magnetic rod matrix, driven by an electromotor, prevents blockages of the separator and ensures that the product remains in close contact with the magnets.

Show more


ROTOBOX AUTO-CLEAN
This inline rod magnet system is used for freefall applications involving bulk goods that tend to bridge or cake. The rotating action of the magnetic rod matrix, driven by an electromotor, prevents blockages of the separator. Cleaning of the magnets is fully automatic, as the magnetic cores are pneumatically transported inside the stainless steel tubes to the cleaning zone.

Show more


SM
Permanent magnetic filter bars can be installed anywhere in the bulk material stream. The extremely high magnetic forces separate even weakly magnetized stainless steel particles from the product stream.

Show more


RAPID PRO-SENSE

The RAPID PRO-SENSE metal separator primarily is used for quality inspection (product purity) in the production and compounding of plastic granulate, where it typically is installed directly before the material is filled in bigbags, octabins, or silos. The metal separator also is used for quality inspection in the incoming goods department of plastic-processing plants (product purity, machine protection).

 

 

Show more