Sesotec metal separators and magnet systems protect extruders from damage that can be caused by metal particles in the plastic granulate, even when enclosed in the product. Equipment stoppages and production downtime caused by plugging of melt filters and nozzles are reduced.

 

EXTRACTOR-SE
A magnetic separator for high material throughputs, and larger column diameters (40 – 120 mm) and particle sizes (8 – 10 mm), the EXTRACTOR-SE is installed at the feedstock intake of the extruder and is used to remove ferrous materials prior to processing.

Show more


GF
These metal separators are designed to be installed in horizontal, vertical or inclined vacuum and pressure pipes. Detection and removal of contaminants is effective even at high speeds and rejected material is removed into a container with no interruption to material flow.

Show more


GM
Permanently magnetic grid magnets can be supplied in circular, rectangular or square format and are therefore universally applicable. Ferrous particles are filtered out from bulk material as they pass through the magnetic grid.

Show more


GMT
An economical permanent magnet system installed at the feedstock intake of the extruder, the GMT eliminates larger particles of ferrous metals to produce a higher quality product and reduce expensive repairs.

Show more


MAGBOX AUTO CLEAN

The magnetic separation system MAGBOX AUTO-CLEAN is used in process lines for the efficient and automated cleaning of even the finest ferrous contaminations from gravity fed bulk materials.


MAGBOX MXP
MAGBOX inline magnets are mainly installed in existing pipeline systems to remove fine and very fine ferrous metal contaminants from bulk materials.

P-SCAN RP
Metal detector for installation in pipeline systems, e.g. for free-fall applications, pneumatic conveyor lines, material columns that are slowly moving down, or pump feed lines. The metal detector is used for the inspection of bulk materials, fibres, or liquid/pasty products.

Show more


RAPID 4000-FS
Metal separator for freefall applications that is installed at the discharge of the cyclone or bag filling tube, for applications requiring higher scanning sensitivity.

RAPID DUAL
Metal separator used to inspect slowly moving bulk material such as foil flakes as well as large streams.

RAPID PRO-SENSE

The RAPID PRO-SENSE metal separator primarily is used for quality inspection (product purity) in the production and compounding of plastic granulate, where it typically is installed directly before the material is filled in bigbags, octabins, or silos. The metal separator also is used for quality inspection in the incoming goods department of plastic-processing plants (product purity, machine protection).

 

 

Show more


RAPID VARIO-FS
A metal separator with product effect compensation, the RAPID VARIO-FS is installed at the feedstock intake of the extruder. Because the detection and separation units are separate, the system can be adapted to many different configurations and conditions.

Show more


SAFEMAG
The SAFEMAG inline magnet was developed specifically for applications in the plastics industry. It is designed for inspecting different granulates up to a grain size of 6-8 mm at a temperature of up to 100°C in standing or slow-moving material columns.

Show more


SM
Permanent magnetic filter bars can be installed anywhere in the bulk material stream. The extremely high magnetic forces separate even weakly magnetized stainless steel particles from the product stream.

Show more